iGulu 1-Gallon (116 oz.) Tritan Fermentation Keg
-
Estimated Delivery:Nov 24 - Nov 28
-
Domestic Warehouse in US,CA,DE,AU,UK
Crystal-clear visibility, premium-grade Tritan material, and a leak-proof design make the iGulu Fermentation Keg a must-have for quality
brewing. Designed for pressure fermentation with F1 and S1 brewers. The maximum temperature for use, added liquids, and cleaning is 40°C (104°F).
iGulu 1-Gallon (116 oz.) Tritan Fermentation Keg
-
Durable Tritan body
-
Pressure relief valve
-
Secure O-ring seal
Durable Tritan Fermentation Keg
Made from Eastman Tritan, a BPA-free material commonly used in baby bottles. The clear, durable body is designed for brewing under pressure and makes it easy to check the marked fill level.
Built for pressure fermentation.
The clamp and O-ring help keep the keg sealed during fermentation. The lid includes a pressure relief valve. Follow your brewer manual to release pressure before opening the keg.
Fermentation Keg
1-Gallon Tritan Fermentation Keg
The clear Tritan body lets you see the liquid level as you fill. Follow your recipe and use the marked fill line as your guide.
Fermentation Keg Lid
The clamp secures the lid, and the O-ring helps seal the joint between the lid and the keg.
Easy Set-up Design
Place the keg in your brewer, then attach the dispensing tube and the gas connector to their matching ports as shown in the brewer guide.
Seal & Drawing Tube
The O-ring seals the lid opening. The internal dip tube draws the finished brew from inside the keg toward the dispensing outlet.
Easy to clean.
The smooth interior and wide opening make hand washing easy. Use water no hotter than 40°C (104°F). The removable dispensing tube can be washed or replaced.
Safety & Care
Warning
The iGulu Keg is a pressurized container. Handle it with care and avoid hard impacts. Do not use the keg if it is deformed, cracked, damaged, or malfunctioning.
- Follow your brewer manual to release pressure before opening the keg.
- Do not fill the keg above the MAX line.
- Maximum use / liquid temperature
- 40°C (104°F)
- Maximum cleaning temperature
- 40°C (104°F)
Full use & care instructions
- Do not dry the keg in an oven, sterilizing cabinet, or similar equipment.
- Make sure the clamping ring is properly installed on the keg.
- Clean the valve spool promptly to keep the safety valve operating smoothly.
- Do not use steel wool or sharp objects to clean the keg.
- Keep the keg and its accessories out of direct sunlight.
- The keg has a one-year service life. We recommend replacing it annually.
What’s in the box.
- Keg assembly
1 pressure keg, 1 lid, and 1 clamp.
- Tubes and seals
1 internal dip tube, 1 dispensing tube, and 2 O-rings.
- Also included
Printed setup guide and 1 keg opener.
Brew in rotation
Why keep a second keg?
Get the next keg ready
Clean and sanitize your spare while the current batch ferments, then swap when you’re ready to brew again.
Keep cultures separate
Use one keg for beer and a dedicated one for kombucha or kefir to help reduce culture carryover.
Frequently asked questions
How much can I fill?
Use the keg’s fill mark and follow your recipe. The listed brewing volume is 116 fl oz, approximately 3.43 L.
Which brewer does the keg fit?
Use with compatible iGulu brewers. Check your brewer’s manual for setup instructions.
Can I put the keg in the dishwasher?
Hand wash the keg and its parts using water no hotter than 40°C (104°F). Follow the cleaning instructions in your brewer manual.
What should I check if the lid isn’t sealing?
Follow the manual to release pressure before inspecting the keg. Check that the O-ring is clean and seated and that the clamp is fully closed.
Is the dispensing tube removable?
Yes. Follow the brewer manual to remove and clean it, or replace it with the matching tube.
Blog posts
Water Kefir: Origins, Brewing, Benefits
Hefeweizen: A Royal Beer Style That’s Anything but Basic
How to Customize Your Sea Salt Gose with Fruit Juice
Durable Tritan body
Pressure relief valve
Secure O-ring seal