restart cooling for a completed brew cycle

• d

  dshiffman

  8/17/25, 1:54 PM

  I accidentally canceled out of the cool/serve cycle after a successful brewing session (I was trying to find a way to set the dispensing pressure) and now I can't get the F1 to allow me to set it.  When I go to Cooling menu, and i set pressure and temp, the start button won't activate.  The LED on the front of the F1 is orange making me think it's in brewing mode but I can't find a way to exit.  

  Using the application doesn't help even if I 'reset' the unit it still comes back with the LED orange.

  Help!

  1) how do i cancel brewing to get back to a white LED

  2) how to i set cooling/pressure for an already brewed keg

  0 likes 0 likes Liked Like

  ---

  2
  Posts

  46
  Views

  Reply

  ---

• F

  Freddie Admin

  8/17/25, 6:42 PM

  1. After a 30-second power-off, when the machine restarts, does the screen remain on the main menu interface and is the ambient light orange?

  
  2. If your F1 machine is running firmware version ≥ 2.7.4, when manually starting the cooling program in CO₂ mode, you can set a custom dispensing temperature and pressure.

  0 likes 0 likes Liked Like

  ---