@Gene Going to larger ID tube would most likely give you more foam, since there would be less resistance in the line to balacane out the pressure. For less foam you want to try and get the line res...
Posts made by Ryan
-
Solved: Excessive Foaming While Pouring Issueposted in General Discussion
-
Master Mode Cards 💳posted in Announcements
@April The igulu support team did get back to me with answers on the issues i was experiencing. It sounds like they are to be expected and how the current settings for the machine/app are set up, a...
-
Master Mode Cards 💳posted in Announcements
@April Sorry for the longer post here. I am experiencing some odd issues with the machine now. Today I have updated the machine to the latest firmware through the app, and hoping that's not ...
-
Master Mode Cards 💳posted in Announcements
@April I am having the exact same issue as Brendan. My machine already has master mode unlocked, but the app is saying I do not have premium and need to purchase in order to have those features. I...
-
Android Phone Appposted in General Discussion
Do you know when, or have an estimate as to when the Android app is going to be availbe? I don't see anything on the play store, and the one I downloaded via the QR code won't login or let me regi...
-
Amber lager very little pressure during fermentationposted in General Discussion
@Mark It sounds like you didnt put the little red sealing gasket onto the orange lid properly. I noticed I forgot to install that onto my lid for my first brew, a day after I started it. Once I put...
-
Solved: Excessive Foaming While Pouring Issueposted in General Discussion
@Roger That's one other way to do it. I prefer balancing the line lengths to the correct regulated pressure, rather than trying to balance a decreasing pressure to the short original line lengths ...
-
Hard ciderposted in Ciders
@David Where did you get the app, and are you on android? I downloaded the latest version of the one from the scanned QR code in the manual (11/23), but I can't get it register or login. Did you us...
-
Solved: Excessive Foaming While Pouring Issueposted in General Discussion
@April I just sent you a message with the tube I used and some pics. I'll post below here too, in case anyone else wants to copy what I've done. Tubing I used: https://www.mcmaster.com/669...
-
Solved: Excessive Foaming While Pouring Issueposted in General Discussion
@Jacky Yeah, the original tubing slid off the barb pretty easliy. The new tubing I had to heat up in hot water to soften it up a little bit, and then pressed it on as far as I could. It didn't go ...
-
Solved: Excessive Foaming While Pouring Issueposted in General Discussion
Hello everyone, Doing a little bit of reading around on different home brewing forums and some experimentation for myself, I was able to fix the excessive foaming I was having while pouring beers....
-
Beer Line Tubing Infoposted in Equipment & Sanitation
@April Thank you for those specs! Would you be able to tell me the material as well? Silicone, Vinyl, PVC, or something else?
-
Beer Line Tubing Infoposted in Equipment & Sanitation
That was my thought as well. The ~1' section of line seems way too short to provide a propoer resistence, especially at 15 psi, which is what my machine seems to be set to by default, and I haven't...
-
CO2 pressureposted in General Discussion
Did you update the machine recently? The unit I received has never had a "toolbox" or "toolkit" option for me to choose from. I can only choose from fermentation, cooling, sparkling water, or sett...
-
Master Mode Cards 💳posted in Announcements
Hello, I just received my master mode card in the mail today and was curious if once we activate master mode with the card, if we reset the machine under the settings will it remove the master mod...
-
Master modeposted in Shipping, payment and warranty
Is there a tracking number for the master mode cards, like there was for the machine? Do you know when someone on the east coast of the USA can expect to receive their card?
-
Beer Line Tubing Infoposted in Equipment & Sanitation
Hello, I wanted to know, what is the size of the clear beer line tubing used for dispensing from the keg? Is is 3/16" inside diamter or something else? Do i need a certain outside diameter as well...
-
PSI during brew cycleposted in General Discussion
Yeah, it does seem like normal function. I timed it out, and it seems to be checking/updating pressures every 5 minutes. So I'm assuming that's what it's programmed to do.
-
👑 iGulu Original Backersposted in Announcements
Ryan S Indiegogo Contribution ID 168 Contribution Date: June 29, 2016
-
PSI during brew cycleposted in General Discussion
Has anyone elese noticed that the pressure readings don't seem to be exactly real time? Hoping it's not just my unit. It takes a minute or so for my unit to update the pressure reading if I do a m...
Search
Forum statistics
- Page views (24h):
- 100
- Page views (30d):
- 5,324
- Topics:
- 76
- Posts:
- 358
- Members:
- 163
