How is your cider going? I plan to do a cider and mead soon, but got distracted with Kombucha, and I think I want to try to do a Lambic.

@Bojan    Hello all, Im fermenting at 52 degrees and 24 psi. The Igulu is saying i have 5 more days left, but im sure that it allready shoud be at day 3. The vertical light bar has b...

@Admin Clear out these spam posts that keep appearing in threads. Both posts from Sedder are spam, user needs to be banned.   Edit: Admin removed post I was talking about. :)

I have sent 2 messages to support and one direct message on the forum and still no answer or any help.   From what I have seen, they have been pretty quick with any problems so I am not s...

I was backer #213 on Kickstarter 

Hello all, Im fermenting at 52 degrees and 24 psi. The Igulu is saying i have 5 more days left, but im sure that it allready shoud be at day 3. The vertical light bar has been green for 2 days, if...

Finished my first Kombucha using the iGulu with the adapter I printed from your STL. Turned out great. Made a peach flavored one and took around 14 days total including the second fermentation. Ea...

@Dood Go into your settings and perform an update directly on your Igulu. There should be a "Sparkling" option. If you are a backer you should have also recieved a master mode card which unlocks t...

With the latest firmware version the Default Kombucha setting still does not work at all, but the custom option in the Kombucha area DOES work. The directions for making kombucha video for the S1 ...

My update reported unsuccessful, but it actually succeeded. When I checked the version if was the newest release. That was updating from the box to version 2.5. This most recent update I did a few ...

Just taken my F1 out of its box, connected it to the app and initiated an update (which failed). At that point the ambient light on front of the machine has gone red and the app says "malfunction"....

Backer #1247 on Kickstarter 

Was able to download a newer firmware on my unit and the problems were fixed, including unlocking master mode. I have left quite a bit more feedback on my other forum post "Detailed info on workin...

It would be nice to be able to inject pressure as well without requring the user to back out of other modes. For example if I have it set to chill something, the only way to add more pressure is t...

Ran an update on the unit again, and it found a new update.  Once I updated again from 2.5 to the latest build, master mode also unlocked on the app. I have not sent anything over from the a...

I solved this problem. I needed to screw the canister in a little harder to depress the center valve on the CO2 canister or it was sligtly off-line and reseating it fixed the problem.

This version does not actually fix the issues that the release notes state it fixes. Abnormal exit after modifying personal information Synchronize device work information and display data sync...

@Admin Halaster, Backer #48.

Really looking for a reply here on how to fix the app to properly support master mode.As I posted 11 days ago, the android app still tells me I have not upgraded to the premium version. Fully delet...

My app stays connected via wifi but it clearly isn't connected to the u it because I can't control the unit via the app,I can't monitor the line condition of the unit.  Frustrating.