Can I set target psi?

• Pressure
• psi
• gas
• co2

• 

  Jamie

  1/10/25, 2:44 AM

  I want pressure for pouring to be 12 psi, obviously I can manually release pressure by pulling the valve on the keg until psi reads what I want it to. But is target pressure setting a feature? use case for example if pressure falls below desired psi, how to aim it up? I don't see anything in the controls on the machine, or UI or in app, unless I've missed it, doesn't seem to be a feature.

  0 likes 0 likes Liked Like

  ---

  2
  Posts

  38
  Views

  Reply

  ---

• F

  Freddie

  1/10/25, 10:27 PM

  Hi Jamie,

  Pressure setting is not an automatic feature for the F1 machine and requires manual operation. 
  You can end the current program and go to "Craft → Pressuring → CO2/Air Pump" on the screen to manually add pressure to the keg, provided that the machine is activated in Master Mode. Then restart the CO2 or Air Pump mode in the cooling program.
  If you don’t have a Master Card, you can contact support@igulu.com, and customer service team will assist in activating it remotely.

  0 likes 0 likes Liked Like

  ---