@Nova @MafD  I went ahead and recorded the entire process myself as well to show how to do this, including the oxygen purge. Not as professional as their videos are, but a more realistic idea...

Hi i have now my second brew and it kind of works (except a Temperature problem. ) another observation is that the wifi connection to the app is only working for a minute after a restart and then...

@Tristan Yep, it is really a pain in general to figure out exactly what is needed for the Australia/New Zealand version. For everywhere else in the world you can do a simple search and find a thous...

@Halaster Funny, I did some digging and it looks like the G1/2 type 30 is most likely the correct one (see here) https://kegland.com.au/products/sodastream-cylinder-filling-adaptor-refill-fill-stat...

@Halaster Here is the video: https://youtu.be/jnwvLthipNU?si=WO6U3zwjjMLgCcXJ

@Tristan Can you link the video for that? I had found what you are linking as well, but as far as I could tell W21.8-14 is not the Soda Stream thread, but the standard thread for Australian Co2 ta...

@david I use one of these https://www.fruugoaustralia.com/co2-cylinder-adapter-for-sodastream-tr21-4-male-thread-to-g12-type30-female-thread/p-312688311-698157910?language=en&ac=google&...

@david I found an Australian youtube channel that managed to find an adapter for our SodaStream. The ebay search term they used is: CO2 Tank/For-Outer Thread TR21*4 To W21.8-14 Converts/Adapters ...

Honestly, I will be interested in if the unit can actually heat hotter than 40, and they just set that temperature as a practical limit for fermentation and not based on what the machine can actual...

So to save on oversea shipping I bought a big box of kits that arrived today, only to find that half of the kits has a best before date in 10 days. Hopefully the yeast has a longer expire date. Bu...

I stand corrected. I guess you shall not belive everything on the internet then :)  

@Nova It actually does include a heater. If you go from chilling mode to fermenting or a custom mode you can actually hear the unit start making sound. It is also documented in the Help Center on t...

The iGulu does not heat, it only cools. So maybe you the machine in a warmer room?

@david  As far as I can tell no adapter exists to convert Australian and New Zeland SodaStream Co2 threads to standard SodaStream threads, and this is not specific to just iGulu. A lot of inf...

@Joerg Most likley same issue, yours just made it further into the process than his did before your yeast kicked it early. The recipie is definitely not wrong, it just just when breweing there is a...

Hi I am brewing the Hefeweizen by the temperature should be 18 and is just 15 c.m, hence too low.  So it seems like the iGulu f1 is not heating enough. Any work around. 3C during fermentation ...

the manual says i need a thread size of tr21-4. the australian sodastream uses a difrrent thread size. does anyone know what size it is and if there are adpaters? my beer is ready but i need some ...

Here the same, location of my machine was in the living room with constant 21 degrees celsius (70 degree fahrenheit). the machine used the predefined recipe for German Wheat Beer. Pressure raised i...

Hello,I made a similar experience as Pakpoom, but I had pressure in the system (around 1,6 bar at the end). The taste was exactly the same as Pakpoom described, really sweet and I had a solid and d...

I made this for fun https://brewmonitor.info/brew.php It was a 10 minutes effort so there is a lot to be desired :)It will only work if your device is currently in fermenting mode, only shows tempe...