Dear Chris, Can you please put the tank of beer in the fridge, and unplug the machine. leave the machine unplugged over night. then plug it back in, and then restart it again and put it in cooling...
Dear Chris, Can you please put the tank of beer in the fridge, and unplug the machine. leave the machine unplugged over night. then plug it back in, and then restart it again and put it in cooling...
As a matter of interest, why is Master Mode needed?Why don't the machines just ship with the ability to do custom settings?
hi, it is dishwasher safe. However, it might be clean that well in the dishwasher due to the shape. We recommend that you clean it manually and sanitize it.
@Ryan hi ryan, no when you reset, you will not remove the master mode function. if you reset and run into any issues, please let us know and we will help.
I have been looking for confirmation but no luck. Is the keg dishwasher safe? My DW has a sanitize mode which I would use but afraid the keg would melt. Can someone confirm or assuage my concerns?
@Chris the machine finally went into cold crash mode about 12 hours after my last post, and managed to successfully maintain temps at 33-35F thereafter, I guess the timer doesn't correlate exactly ...
@Jim was having same issue. Switched off and back on. When came on held the card and it took
Received in mail yesterday. Does absolutely nothing for me. I've tried both sides of card. Nothing. Turned off and back on still nothing. Tried again later and it worked.
That was my thought as well. The ~1' section of line seems way too short to provide a propoer resistence, especially at 15 psi, which is what my machine seems to be set to by default, and I haven't...
Did you update the machine recently? The unit I received has never had a "toolbox" or "toolkit" option for me to choose from. I can only choose from fermentation, cooling, sparkling water, or sett...
Federico R Contribution ID 336, August 2016 Indiegogo
@April I haven't received mine, either. I'm in Pennsylvania.
Hi All, First, a huge thanks to Igulu for coming through and delivering to backers. You all could have walked away. I suspect most would have. Not you all. You all have shown great character...
Hello, I just received my master mode card in the mail today and was curious if once we activate master mode with the card, if we reset the machine under the settings will it remove the master mod...
After 2 failed brews due to too much foam and reading all the tips on here, I tested my 3rd brew trying a different method that doesn't require as much effort. Essentially, during fermentatio...
So I have installed the "Master" config and get the diamond on the F1 Screen. I was once able to get to the pressure adjustment, (I set it to low) I can no longer get back to that screen (don't eve...
I'd be interested in seeing how this works. A longer beer suply line might solve the foam problem.
I brewed my 1st batch no problem and it was great. Second one fermented fine but after it was done and I started drinking it, the unit stopped cooling . I thought it was something...