Yes, the water was cold. I've used the sparkling water function with both plain water and twice with a sodastream syrup mixed with water, and all three times it has come out flat. It takes 10 hours...
Yes, the water was cold. I've used the sparkling water function with both plain water and twice with a sodastream syrup mixed with water, and all three times it has come out flat. It takes 10 hours...
@JEFF Same. Eagerly awaiting a functional app. Can you edit the cycle using the touch screen on the Igulu?
@Brendan If that's from the phone, (android or Ipad) I can't get there.
@David huh, I haven't been able to connect my machine to the app, wifi, bluetooth, etc.I'm interested in trying your recipe though once I get through these Pale Ale kits that are about to expire.
@JEFF use mastermode and make a custom brew cycle???
@Ryan Trying your method next but I found that disconnecting Co2 from the keg, bleeding off using the PRV and pouring worked well. If I wanted more head, I'd just reconnect the Co2 and top off the ...
My machine hung up a few days ago, I switched it off and back on and it Stacked another total brew, so it went from 8 to 16 days. I seen no way to edit a current brew. Any thoughts.
The cider is very dry considering that I didn't add any additional sweeteners to it. I added a small amount of apple juice to the cup before pouring the cider in and it tastes really good. Pretty s...
With the popularity of beer with no alcohol, I've come across some great IPA's that look and taste great that are zero % alcohol. I would be curious to know of recipes you could use with the F1 Igu...
@Roger That's one other way to do it. I prefer balancing the line lengths to the correct regulated pressure, rather than trying to balance a decreasing pressure to the short original line lengths ...
Curious if people have thoughts or if IGulu has anything else to add...seems interesting all the same!
Is the water you are using cold? It can take a while for Co2 to carbonate liquid. You coud try hooking up the Co2 and then shaking the keg to increase surface area with the gas. Have you been able...
Has anyone had any luck with sparkling water or other carbonated non-fermented drinks? There's a sparkling water option but after 10 hours of it "pressurizing" it still spits out flat water. I thin...
Turn off the CO2 canister and release some pressure before pouring. This totally solved for me. Once done, turn on CO2 for preservation.
I just experimented with the CO2 valve under the canister and was able to successfully pour several foam free glasses of beer!! I've just finished my third brew (Bavarian Wheat this time) and was g...
I have the same issue. I think the tube is simply too small. I worked at a brewery and we had one bank of taps that were smaller than all the others in the bar. That tap always was foamier than the...
So while washing up the mess I found the culprit. The dispenser hose had a small hole it it right where the pinch clamp was located. pressure built up enough to. Were a siphon and all that b...