@Chris the machine finally went into cold crash mode about 12 hours after my last post, and managed to successfully maintain temps at 33-35F thereafter, I guess the timer doesn't correlate exactly ...

@Jim was having same issue.   Switched off and back on.   When came on held the card and it took

Received in mail yesterday. Does absolutely nothing for me. I've tried both sides of card. Nothing.   Turned off and back on still nothing.   Tried again later and it worked.  

That was my thought as well. The ~1' section of line seems way too short to provide a propoer resistence, especially at 15 psi, which is what my machine seems to be set to by default, and I haven't...

Did you update the machine recently? The unit I received has never had a "toolbox" or "toolkit" option for me to choose from. I can only choose from fermentation, cooling, sparkling water, or sett...

Federico R Contribution ID 336, August 2016 Indiegogo

@April I haven't received mine, either. I'm in Pennsylvania.

Hi All,  First, a huge thanks to Igulu for coming through and delivering to backers. You all could have walked away. I suspect most would have. Not you all. You all have shown great character...

Hello, I just received my master mode card in the mail today and was curious if once we activate master mode with the card, if we reset the machine under the settings will it remove the master mod...

After 2 failed brews due to too much foam and reading all the tips on here, I tested my 3rd brew trying a different method that doesn't require as much effort.  Essentially, during fermentatio...

So I have installed the "Master" config and get the diamond on the F1 Screen. I was once able to get to the pressure adjustment, (I set it to low) I can no longer get back to that screen (don't eve...

I'd be interested in seeing how this works. A longer beer suply line might solve the foam problem.

@Ky  I'm having the same issue

I brewed my 1st batch no problem and it was great.  Second one fermented fine but after it was done and I started drinking it,  the unit stopped cooling .  I thought it was something...

One of the features I liked when I committed to this Kickstarter was the ability to bring your own recipes.  I was comparing the third-party kits from Craft a Brew and they have actual hops, n...

I have brewed 3 batches of beer to date. the first was the pale ale and I was impressed with the taste and the carbonation level until the CO2 didn't dispense and repressurize the keg. The second b...

No thanks. I do not want another machine. I wanted what i ordered originally but that seems to be not what we are getting.  Hmm

Is there a tracking number for the master mode cards, like there was for the machine? Do you know when someone on the east coast of the USA can expect to receive their card?

Hello, I wanted to know, what is the size of the clear beer line tubing used for dispensing from the keg? Is is 3/16" inside diamter or something else? Do i need a certain outside diameter as well...