So after a few days of frustration with 100% foamy beer that takes 20+ minutes to settle, I tried an experiment. 1) Manually release almost all the CO2 from the keg. This left it at ~11PSI (when t...

wait until it finished the brewing cycle, if it is still at high temp when it is in cooling mode, then unplug the machine, put the beer tank in fridge. let the machine sit unplugged over night. th...

hi, please add the sugar into the tank as it is part of the brew kit.

My Pale Ale kit included priming sugar. I can't find any instructions as to when it should be added to the fermentation. I started the brew without it, thinking that since I'll be using a CO2 tank ...

Update this am, still reading 62F (as below). Any clues on how to remedy this?

Brewing the Bavarian Wheat, 2 days left on brew cycle, but temperature reading is still 64 F. The recipe specifically says the last 2 days are cold crash days in the 30's. Anyone else had this issu...

At what point do we just accept that this "production model" is still in beta.  No matter what I do, every pour is straight foam.  I don't need to hear that: "tilt the glass, and slow po...

Yeah, it does seem like normal function. I timed it out, and it seems to be checking/updating pressures every 5 minutes. So I'm assuming that's what it's programmed to do.

Same here...normal operation it seems

Yes, iGulu is shipping out Master Mode unlock cards, actual ship date for every backers may be different. Master Mode unlock cards can only be used once and will permanently unlock your machine fo...

Shame to hear; I borrowed an ipad from someone to at least get the machine updating.   But without premium enabled still nor the master card I can't actually start anything useful. I didn't ...

Kickstarter backer #451, April 5, 2016. I chose a black one so I have a bit longer to wait. I've gotten so much brew stuff in the last 8 years I don't have time for it all, but I'm looking forward...

Ryan S Indiegogo Contribution ID 168 Contribution Date: June 29, 2016

Has anyone elese noticed that the pressure readings don't seem to be exactly real time? Hoping it's not just my unit. It takes a minute or so for my unit to update the pressure reading if I do a m...

I came here to ask the same thing. My Kickstarted package includes a few extra kegs as well. Feb 28th they said, "Due to limited kegs are produced, we will ship extra kegs to the backers who backed...

@Admin Stephen Brownell  Pledge ID: 16957621 Perk: 1x iGulu System + 3 MiniKegs Estimated Delivery: December 2016 Contribution ID 110

KS backer #486. Just finished my first brew.

If I recall, the original design let you remove the brewing keg from the machine and serve from it while brewing a new batch. I asked the same question over on the kickstarter page, not got a resp...

@Jack That could definitely help. I may be misisng something obvious, but how do I actually manually reduce the pressure and keep it that way? The only way I know would be to turn off the CO2 cylin...

@stuart If there's too much foam, you may try to manual reduce a little pressure from the fermenter, and let it sit about 2 days in cooling mode. For Pale Ales, try to have the ending pressure rang...