Yes, iGulu is shipping out Master Mode unlock cards, actual ship date for every backers may be different. Master Mode unlock cards can only be used once and will permanently unlock your machine fo...
Posts made by Jack
-
device not showing in appposted in Customer Center
-
2nd brew still all foam and flatposted in General Discussion
@stuart If there's too much foam, you may try to manual reduce a little pressure from the fermenter, and let it sit about 2 days in cooling mode. For Pale Ales, try to have the ending pressure rang...
-
Master Mode Cards 💳posted in Announcements
@JEFF Hi Jeff, try to use the card again when your current batch is done, reach out to support@igulu.com if you run in to trouble unlocking master mode.
-
Android Phone Appposted in General Discussion
Unfortunately, the app is still in development stage, so you might have trouble connecting it at the moment, and the team is working on it, but you are still going to be able to start the brewing m...
-
PSI during brew cycleposted in General Discussion
The normal pressure range inside the fermenter is 0-29psi, if the pressure is too high, the machine will alert you, and then you can manually release the pressure by loosing the tube. This is becau...
-
PSI during brew cycleposted in General Discussion
The machine is equipped with dual safety valves—one manual and one built-in for automatic release if pressure gets too high. If a customer's pressure reads around 38psi without an alert from ...
-
PSI during brew cycleposted in General Discussion
For Pale Ales, ending pressure range 7-13 psi. For Amber Lagers, ending pressure range 10 to 14 psi. For Bavarian Wheat, range 15-20 ending psi.
-
PSI during brew cycleposted in General Discussion
During fermentation, psi sometimes can go as high as 37 psi, and there is a pressure sensor on the mainboard inside the machine to detect pressure, so the gas pipe must be connected in order to det...
-
👑 iGulu Original Backersposted in Announcements
If you like to check on the update of your machine for your region, pls email us crowdfunding@igulu.com with your info. thank you!
-
2nd brew still all foam and flatposted in General Discussion
Please check the Co2 connection valve to see if that might be the issue, video link is below: https://youtu.be/0BVxckr8z_g
-
device not showing in appposted in Customer Center
Unfortunately, the app is still in development stage, so you might have trouble connecting it at the moment, and our team is working on it, but you are still going to be able to start the brewing m...
-
2nd brew still all foam and flatposted in General Discussion
There are many variables that can cause excessive foam in the beverage, and we cannot guarantee it. Here are some suggestions to reduce foam when pouring drinks: 1) Use chilled glasses to pour the ...
Search
Forum statistics
- Page views (24h):
- 145
- Page views (30d):
- 6,698
- Topics:
- 136
- Posts:
- 713
- Members:
- 350
