I received 5 packets of the Bavarian Wheat beer, which is very nice. I am thinking of making my own stout to try it out. I am new to the craft beer world, so I am not sure if this idea will wo...

I  was brewing my 2nd batch of this today. The first batch turned out perfectly.It was about 8 hours since I started it, and I noticed the PSI was at 0. So I worried that something was wrong, ...

@Freddie The issue is I cannot control the carbonation level since it is always leaking out. Even with master mode, if I inject pressure to raise it up to a certain level, such as 12-15, within a f...

@Halaster Thank you so much for being active on the forum and helping others with various issues. Based on the video and description you shared, we would like to know if the issue of the PRV (Pres...

I am still getting regular Co2 leaks from 3 out of 4 of my kegs. The leaks are coming from the PRV area even when the PRV is fully closed. I pour water onto the keg lid and can see the Co2 bubbli...

@Freddie Thanks for the insight, and glad to see you guys are become a little more active on the forums again, as there has been a decided lack of official presence for a few months.

Thank you so much for your suggestion. In the early design stage, we did consider making the lid in the form of a ball lock, but we had to abandon this approach for the following reasons: 1. The ...

@Captain Zym  Can you post photos and a small guide of converting the liquid line here on the forums showing what you did exactly and which products you used? Isn't the method of transfer ri...

@Nova Since his app was actually connecting for 1 minute before disconnecting, it is most likely just a bad signal, versus being connecting to an unsupported range. Luckily he got evertyhing going ...

@Bernd The igulu only support 2.4Ghz wifi. That might be the problem you have?

  I would love to have the lids for the kegs converted to Ball Lock. I know the center (liquid line) is an easy switch (I did it with a stainless steel post), but the PRV and the CO2 line-in...

@Halaster No problem, Let's find some way to do it.

@Nova Yes, I agree with your concern. It shall be fixed.

Support eventually replied, citing being on holiday for the Mid-Autumn Festival in China as the reason for the slow response. Here's what they said about the soon to be out of date brew packs:...

I second the request to make the data available if you "fix" this bug. It is nice to have access to the data outside of just the app, as there appears to be no sensitive data currently.  Eve...

@Shu No worries. And as mentioned I dont see the mqtt data as a privacy issue, since there is no sensitive data beeing shared. My only consern is that one might send commands to other peoples mac...

Hi Nova, We want to extend our sincere thanks for discovering and bringing the system bug to our attention. Your post is invaluable to us as we continue to improve our product. Our software and s...

@Nova, Thanks for your brewmonitor, it is very neat. Apart from looking at the Igulu mqqtt data,  I am also interested in capturing data from commerical temperature\humidity sensors  that...

@Pakpoom Did you dump the first two batches and not try to add more yeast to the failed batches to start them back up? That way we would know for sure if the yeast was dead for some reason. There ...

Hi thanks for you guy information. In my case the expire date is 2025. I've fail the first 2 batches already. I just start the new batch 2 day ago. I just bring the keg to check and surprise no bub...