just finished first brewing, all went great with surprisingly good beer, iGulu went into serving mode but after a while the display started to change continuously from screen to screen changing set...

Was playing soccer with my nephews last weekend, and I noticed I ain’t as quick as I used to be. Started wondering about testosterone stuff, like pills or shots, and which is better. Found ht...

I want to do the exact same thing.  Hopefully Igulu will sell us the connectors to do so. 

The joy was short lived. It was ok for a day or two but once it disconnected the problenm came.  With the latest app update and firmware update it is now back to square one. It looses the wif...

The joy was short lived. It was ok for a day or two but once it disconnected the problenm came.  With the latest app update and firmware update it is now back to square one. It looses the wif...

Thanks Ryan, that helped quite a bit. I was pulling my hair out over here.  :)

Hi Forrest, If your machine is F1 and is not running the latest firmware version, the firmware upgrade can only be performed directly on the machine’s screen.   “Idle state&rdquo...

System continues to show "Not in Idle State" and I am unable to upgrade firmware.  I cannot find ant explaination of what IDLE State is.  Any Help?

Hi Austin, Once your F1 or S1 machine is upgraded to Master Mode, you gain access to custom fermentation recipes. Through the "Recipe" feature in the app and the "Craft" function on the machine sc...

So when I had a PicoBrew, there were two steps: brew the grains to produce the wort, and then ferment the wort. From what I understand extracts can be brewed instead of the grains. Does this devic...

Could you please provide the parts numbers used and where to buy?

had the same problems and this is how I fixed it after much frustration: My first brew and I am only 4 hours in so I didn't mind restarting the brew.  Downloaded the latest version of th...

I had the same problems and this is how I fixed it after much frustration: My first brew and I am only 4 hours in so I didn't mind restarting the brew.  Downloaded the latest version of ...

@Freddie - a proffesional answer I was looking for - thanks !!  

Step-by-Step Instructions for Counter-Pressure Transfer: Prepare the New Keg: Clean and sanitize the new keg thoroughly. Assemble the Transfer Line: Connect one end of the transfer line to the ...

Hi Ryan, The gas quick connector on the iGulu keg lid is custom-made and cannot be purchased on the market. The gas tubing specifications are ID 4mm × OD 6mm. The F1 machine currentl...

Hi Tomasz, Fermentation is Mainly Divided into Two Stages: Primary Fermentation + Secondary Fermentation Primary Fermentation: Different beer styles require different primary fermentation ...

could anybody explain the temperature stages in the fermenting proces idea, pleasein clasic home brewing I keep the same tempearture the whole processthere are always at least two temperature stage...

Hello @April Hsiung @Admin @Admin or whoever else may be able to help, I was hoping someone would be able to tell me what the size is for the gas line tubing, and what type of connector the press...

have you connected the pressure hose to the keg? it seems like the pressure is not locked up