The iGulu does not heat, it only cools. So maybe you the machine in a warmer room?

@david  As far as I can tell no adapter exists to convert Australian and New Zeland SodaStream Co2 threads to standard SodaStream threads, and this is not specific to just iGulu. A lot of inf...

@Joerg Most likley same issue, yours just made it further into the process than his did before your yeast kicked it early. The recipie is definitely not wrong, it just just when breweing there is a...

Hi I am brewing the Hefeweizen by the temperature should be 18 and is just 15 c.m, hence too low.  So it seems like the iGulu f1 is not heating enough. Any work around. 3C during fermentation ...

the manual says i need a thread size of tr21-4. the australian sodastream uses a difrrent thread size. does anyone know what size it is and if there are adpaters? my beer is ready but i need some ...

Here the same, location of my machine was in the living room with constant 21 degrees celsius (70 degree fahrenheit). the machine used the predefined recipe for German Wheat Beer. Pressure raised i...

Hello,I made a similar experience as Pakpoom, but I had pressure in the system (around 1,6 bar at the end). The taste was exactly the same as Pakpoom described, really sweet and I had a solid and d...

I made this for fun https://brewmonitor.info/brew.php It was a 10 minutes effort so there is a lot to be desired :)It will only work if your device is currently in fermenting mode, only shows tempe...

Yeah just blured the column with the mac address. Not that I see it as personal info ,but some might.  

Interesting info, and could put togther some really informative graphs on how the machines are being used and perform in mass across all owners if someone wanted to. Luckily none of that data appe...

So this was interresing. Since iGulu does not use authentication on their mqtt messages, anyone can see every machines data. Thats "fun", i love the cloud... A small collection.

@Pakpoom  The yeast was dead. There are a few other posters on here that reported the same issue. One said his yeast was actually expired based on the date on it, and it completely failed. Y...

I am writing to seek assistance regarding an issue I encountered while brewing Bavarian Wheat beer using my Igulu beer brewing machine. Here is the step-by-step process I followed: I added all ...

@MafD @Nova You should definitely check out their youtube channel. They have put up a fairly decent number of video guides on how to do things like this, that they have not mentioned anywhere else....

I did not even think of that. Can run the app on Bluestacks and wireshark the traffic coming from it to see what is coming from the app to the machine to control the pressure, and recipies and so o...

It took mine a couple of attempts

I'm hoping to do similar myself. Tapping a finished brew off into a fresh clean keg, leaving the sediment behind in the brew keg should also allow it to travel better and not shake the sediment bac...

https://www.crossmyloofbrew.co.uk/online-store/Hop-Extract-p241775576 For anyone in the UK looking to experiment with hop extracts, I found this company in Glasgow online and have ordered bottles ...

Mine failed on first two attempts, but succeeded on the last. Without me doing anything else then restarting.  

So I might want to bring the brew and machine to a happening, and I bought another keg for this. Can anyone tell me best way to transfer from one keg to another? Close the pinch valve, remove the...